Baoji Hengtong Electronics Co., LTD
Baoji Hengtong Electronics Co., LTD manufacturer of the pressure sensor and pressure transmitter
Add to Cart
Introduction of Pressure Transmitter Sensor
BP93420-IQ pressure transmitters usually use heat sinks to improve the heat dissipation performance of the sensor. The heat sink is in close contact with the sensor, and the heat generated by the sensor is rapidly transmitted to the heat sink through the thermal conductive material, and is emitted through the surface of the heat sink to keep the working temperature of the sensor within a reliable range
Applications:
Performance Parameters:
| Measurement Range | 0~35Kpa…~3.5MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | 0.1%FS |
| Hysteresis | 0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | -20-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex db IIC T6 Gb |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.55kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA | 3 wire | |
| 0/1~5V | ||
| 0/1~10V | ||
| 0.5~4.5V | 5VDC | |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
Ordering tips:
1. When selecting the product, please ensure that the medium to be measured is compatible with the contact parts of the product.
2. When placing an order, please note that explosion-proof type products do not include digital display heads.
3. When ordering transmitters with an LCD or LED display head, the power supply for the transmitter should not be lower than 20VDC.
4. To ensure reliable operation of the product, it is recommended that users install lightning protection devices on-site and ensure that the product and power supply are reliably grounded.
5. The rated working temperature range of the Fluoro rubber O-ring is -20ºC to 250ºC. When the product's operating temperature is below -20ºC, it is necessary to choose an EPDM O-ring seal.
Order Guide:
| BP93420XX | Pressure Transmitter | |||||||
| Code | Outline Construction | |||||||
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter | |||||
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter | |||||
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter | |||||
| IN | Air Conditioning Dedicated Pressure Transmitter | IC | High-temperature Pressure Transmitter | |||||
| IQ/IQT | Large Diaphragm /High-temperature Pressure Transmitter | |||||||
| Measurement Range | -100kPa…0kPa ~ 35kPa…3.5MPa | |||||||
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range | |||||||
| Code | Power Supply | |||||||
| D1 | 24VDC | |||||||
| D2 | 5VDC | |||||||
| D3 | Other | |||||||
| Code | Output Signal | |||||||
| S1 | 4~20mADC | S5 | 0~20mADC | |||||
| S2 | 1~5VDC | S6 | 0~10VDC | |||||
| S3 | 0~5VDC | S7 | 0.5~4.5VDC | |||||
| S4 | 0~10mADC | |||||||
| Code | Electrical Connection | |||||||
| B1 | Hirschmann | |||||||
| B2 | PG7 Plug | |||||||
| B3 | Sealed Cable Output | |||||||
| B4 | 2088 Industrial Casing | |||||||
| B5 | 2088 Industrial Casing with Display | |||||||
| B6 | Other | |||||||
| Code | Pressure Type | |||||||
| G | Gauge Pressure | |||||||
| A | Absolute Pressure | |||||||
| S | Sealed Reference Pressure | |||||||
FQA:
Q: Are you a manufacturer or trading company?
A: We are a professional trading company focusing on marine equipment, parts and materials for more than15 years.
Q: What ship parts and materials does your trading company specialize in?
A: We specialize in various ship parts and materials such as instruments, sensors, lighting fixtures, deck parts, safety equipment, navigation equipment, diesel engine, electrical equipment, and more.
Q: How is the quality of your products guaranteed?
A: We source our ship parts and materials from reliable manufacturers and suppliers who meet our strict quality standards. We also conduct regular quality control checks to ensure that our products meet the industry's standards.
Q: Do you offer any warranties for your products?
A: Yes, we offer warranties for most of our products, depending on their type and application. The specific warranty period and terms will be discussed with our clients during the negotiation process.
Q: What kind of packing, shipping and delivery options do you offer?
A: Generally, we pack our products in neutral cartons or export wooden cases. We offer various shipping and delivery options to meet the needs of our clients. These options include air freight, sea freight, and land transportation. We can also arrange for customs clearance and door-to-door delivery services.
Q: Are you able to source and supply custom-made products?
A: Yes, we have established partnerships with various manufacturers and suppliers who can provide custom-made products according to our clients' specific needs and requirements.
Q: What is your pricing policy for your products?
A: Our pricing policy is competitive and transparent. We consider factors such as the volume of the order, the type of product, and the delivery options when determining our prices. We also offer bulk order discounts and special promotions from time to time.
Q: What payment options do you offer?
A: We offer various payment options such as wire transfer and online payment platforms. The specific payment terms will be discussed with our clients during the negotiation process.
Q: How can clients contact you for inquiries and orders?
A: Clients can contact us through our website, email, phone, or visit our offices if they are located nearby. Our customer service team is always ready to assist with any inquiries or orders.